Description: Original title: Research Report on Market Investment Prospect of China's medical protective suit Industry in 2020 As the Spring Festival of 2020 approaches, the novel coronavirus (2019-nCoV) epidemic broke out and ravaged the whole country. With the spread of the novel coronavirus pneumonia epidemic, the demand for protective supplies has surged. At the end of 2019, pneumonia cases infected by the new coronavirus first appeared in Wuhan and gradually spread to all parts of the country, posing a great threat to people's health and safety. Since the outbreak of COVID-19 pandemic, the consumption of medical protective clothing has increased sharply, and it has become an important medical protective material urgently needed in the first-line anti-epidemic. At present, the production capacity of domestic protective suit is gradually recovering, but some enterprises are facing the pressure of insufficient supply of high-quality fabrics. Medical protective suit is one of the most scarce epidemic prevention medical supplies in Wuhan, Hubei and even the whole country. One of the largest production bases of this product in China is in Xiantao City, Hubei Province, where the daily production capacity has reached 30000 pieces. On February 7, the minimum demand for medical protective materials in Hubei Province was 59400 sets, but with support and directional donations, only 48500 sets were available in the province, and the protective suit still had a gap of at least 11000 sets per day, and the gap was still increasing. In view of the current severe situation of the supply of epidemic prevention and control materials, in order to solve the serious shortage of production and supply of medical protective suit, the government ensures the supply of protective suit by speeding up the examination and approval of qualificatio ns, expanding production/cross-border production, international procurement and other channels. In order to better understand the development of China's medical protective suit industry, the China Business Industry Research Institute has launched the "Research Report on the Investment Prospects of China's medical protective suit Market in 2020", which starts with the knowledge of new coronavirus and the latest developments, popularizes the causes and spread status of the new coronavirus, and promotes the development of new UNK2. Then, the development status of China's medical protective suit industry is analyzed from four aspects: the basic situation of medical protective suit industry, the analysis of medical protective suit industry chain, the analysis of medical protective suit supply and demand market and the analysis of key enterprises in medical protective suit. Finally, the demand scale and future development trend of China's medical protective clothing industry during the epidemic period are further analyzed. It provides reference information for practitioners and enthusiasts of medical protective suit industry. Details are reported below: Expand the full text PART 1: New coronavirus Knowledge and Recent Developments The novel coronavirus (2019-nCoV) is enveloped, and the particles are round or oval, often pleomorphic, with a diameter of 60 to 140 nm. The incubation period of the novel coronavirus is longer, generally 3-7 days, the longest is 14 days,KN95 Mask with Fast Shipping, and the incubation period of individual cases is as long as 24 days. The new coronavirus, the SARS virus, and the MERS virus belong to the large family of coronavirus, and are "brothers and sisters." There are many similarities in the genetic sequence, but they are not exactly the same. Compared with SARS, the infectivity remains to be determined, and the case fatality rate is lower than SARS at present, but the possibility of virus variation can not be ruled out. As of 24:00 on February 11, 31 provinces (autonomous regions, municipalities directly under the Central Government) and Xinjiang Production and Construction Corps reported that there were 38800 confirmed cases (including 8204 severe cases), 4740 cured and discharged cases and 1113 deaths. A total of 44653 confirmed cases and 16067 suspected cases were reported. Hong Kong, Macao and Taiwan reported 77 confirmed cases: 49 cases in Hong Kong,Medical Full Body Coverall, 10 cases in Macao and 18 cases in Taiwan. PART2: Overview of China's medical protective suit Market Medical protective suit generally refers to the protective clothing used by medical staff (doctors, nurses, public health personnel, cleaning personnel, etc.) And people entering specific medical and health areas (such as patients, hospital visitors, people entering infected areas, etc.), whose function is to isolate bacteria, harmful ultra-fine dust, acid and alkaline solutions, electromagnetic radiation, etc. Ensure the safety of personnel and keep the environment clean. The medical protective suit is made of special materials (such as polyethylene), which makes the protective suit light and soft, breathable and waterproof, and also has the function of anti-virus and anti-bacteria. Some protective suit are sealed by rubber strips, which makes the protection effect better.
The main production process of medical protective suit has three steps: cutting process, sewing process and ironing process. In the whole production process, a series of equipment will be used, such as cutting machine, printing machine, embroidery machine, sewing machine, Medical Disposable Coverall ,Against Bacteria Breathable KN95 Face Mask, sewing machine, lockstitch sewing machine and so on. PART3: Analysis of medical protective suit Industry Chain The medical protective suit industry chain mainly includes three links: upstream material supply, midstream production and downstream application. Protective suit are typically made from composite materials such as polyester or polypropylene spunlaid nonwovens with breathable microporous films or other nonwovens, or spunlaced nonwovens with breathable microporous films, or wood pulp composite spunlaced nonwoven. At present, polyethylene flash-spun nonwovens and spunbond/meltblown/spunbond (SMS) or spunbond/meltblown/meltblow/spunbonded (SMMS) composite nonwovens are widely used to be compounded with microporous films, and are subjected to functional finishing of "three repellencies and one resistance" (water repellency, blood repellency, alcohol repellency and antistatic property). Based on the advantages of nonwovens production process and product performance, the nonwovens industry has developed rapidly in China. At present, China has become the largest producer and consumer of nonwovens in the world. In terms of output, China's nonwovens industry grew exponentially in the early stage of development. In 2018, the annual output of all kinds of nonwovens in China reached 5.9322 million tons, an increase of 196.31% over 2008, with a compound annual growth rate of 11.47%. At present, the application of nonwovens focuses on the penetration of high-tech and the use of new materials, which are widely used in construction, automobile, clothing, sanitary materials, aerospace, environmental protection and other industries, especially in the sanitary materials market. PART4: Analysis of medical protective suit Supply and Demand Market At present, The medical protective suit in the news reports mainly include: DuPont Tyvek ® medical disposable protective suit, 3m ® 4565 medical protective suit, Lakeland ® AMN428 ETS medical protective suit, MICROGARD ® 2000 standard protective suit, Steady ® medical disposable protective clothing, Piao'an ® medical disposable protective clothing, Lilang ® Medical Disposable protective suit and Hongdou ® Medical Disposable protective suit. China's medical protective suit manufacturing enterprises are mainly concentrated in central China, mainly in Henan and Hubei, with 21 enterprises approved in the region, accounting for 48.8% of the total number of qualified enterprises in the country; the total number of enterprises approved in East China is 12, accounting for 27.9% of the total. Domestic protective suit production is concentrated in Hubei Xiantao, Henan Changyuan and other places, Xiantao exports more, Changyuan mainly supplies domestic. Henan and Hubei are the main gathering areas of medical protective suit production enterprises in China, with 15 regional enterprises, 5 approved enterprises in Hubei Province, 4 approved enterprises in Anhui Province for medical protective suit, 3 approved enterprises in Shandong Province for medical protective suit, and only 2 approved enterprises for medical protective suit in Jiangxi, Hebei, Tianjin and Guangdong provinces. With the outbreak of the new pneumonia epidemic, the supply of protective materials is facing a fault. In order to alleviate the current tight market supply situation, in addition to the original protective suit production enterprises to speed up production and ensure supply, many clothing, pharmaceutical and other industries have switched to protective suit production business. Some of these companies have adjusted their production plans, some have transformed and added production lines, and have switched to the production of anti-epidemic materials in short supply. PART5: Analysis of Some medical protective suit Enterprises 3m China was incorporated in China in November 1984 and is the first wholly foreign-owned enterprise in China to be established outside the Shenzhen Special Economic Zone. Up to now, 3m has invested more than US $1 billion in China, established 9 production bases, 27 offices, 4 technical centers and 1 R & D center, and employed more than 8,200 people. As a world-renowned diversified technological innovation enterprise, 3m's products and technologies have been deeply integrated into people's lives. At present, 3m has developed nearly 70000 products, ranging from household goods to medical products, from transportation, construction to business, education and electronics, communications and other fields. At present, about 50% of people in the world are directly or indirectly exposed to 3m products every day. 3m's most famous products are protective products such as masks, post-it notes, waterproof sandpaper, masking tape and so on.
PART 6: Forecast of the Development Trend of China's medical protective suit Market Under the impact of the epidemic, medical staff's demand for protective suit has increased significantly. In 2018, there were 9.5292 million health technicians (including doctors, nurses and pharmacists) in China. It is assumed that 10% of the health technicians in the country are engaged in epidemic-related work, consuming protective suit 2 per day (taken off and not reused). Assuming that from January 20 to the end of the first quarter, these medical staff have been using protective suit, the total demand for protective suit is 16.239 billion yuan. This article only shows part of the content. Please log in the Frontier Report Library to download the complete report and the detailed data in the report. [Report recommendation] Research Report on Investment Prospect of Cosmetics Industry in 2020 Research Report on Market Prospect and Investment of China's Juice Beverage Industry in 2020 Research Report on Market Development Prospect and Investment of Landscape Lighting Industry in 2020 Research Report on Market Development Prospect and Investment of Integrated Cooker Industry in 2020 Research Report on the Development Prospect and Investment Opportunities of China's Medical Device Industry in 2020 Research Report on Market Prospect and Investment of China's Quick-frozen Food Industry in 2020 Research Report on Market Prospect and Investment of China's Perfume Industry in 2020 Pay attention to the official account: China Business Industry Research Institute,Quickly Delivery Disposable Protective Clothing, share high-quality reports every day, and quickly enter the frontier report library, more wonderful reports are waiting for you! Return to Sohu to see more Responsible Editor:. zjyuan-group.com
Category:
Tag: Research Report on Market Investment Prospect of China's medical protective suit Industry in 2020 _ Case